- Видео 39
- Просмотров 570 993
Cubemoon / 큐브문
Южная Корея
Добавлен 17 июн 2012
Woodworking and DIY
Making anything related wood and something interesting (experimental)
나무를 이용한 목공품, 소품 및 목공에 필요한 지그 및 실험적인 물건들 만들기
Making anything related wood and something interesting (experimental)
나무를 이용한 목공품, 소품 및 목공에 필요한 지그 및 실험적인 물건들 만들기
Wood Slab Table / 우드슬랩 거실 테이블
I've bought a wood slab then sanded and trimmed put two legs. not too bad /
우드슬랩 구해서 간단히 거실 테이블 만들어 봤어요.
우드슬랩 구해서 간단히 거실 테이블 만들어 봤어요.
Просмотров: 572
Видео
Rotating Multi Purpose Work Bench / 회전 테이블
Просмотров 58711 месяцев назад
April Wilkerson made a great rotating workbench. I just followed her method and modified a little bit to make my own / 회전 가능한 작업대 만들어 봤어요. 두가지 공구를 올려놓고 돌려가면서 작업할 수 있게 만들었어요
Making a Futuristic Custom Les Paul Guitar(Full Build) / 나만의 전기기타 만들기
Просмотров 215 тыс.Год назад
This is my first ever electric guitar build. Using mahogany, walnut, maypole From scratch to finish all by myself as a result, not perfect but it's ok. finished anyway 처음으로 전기 기타를 만들어 봤습니다. 물론 완벽한 음색을 내는 기타를 만들지는 못했지만 그래도 마무리는 했네요. #electric guitar #gibson les paul #전기기타 #custom guitar
Handcrafted Table Tennis Racket / 직접 만든 탁구 라켓
Просмотров 1 тыс.Год назад
Buddy asked me to play ping pong. but where is the racket? I didn't know that racket cost $200 at least So I decide to make my own racket for just $50 탁구 치시는 분들이 추천하는 라켓은 최소 20만원 정도 합니다. 직접 만들었습니다
Router Sled For Flattening The Wood Slab / 우드슬램 수평잡기 지그
Просмотров 859Год назад
I make this sled for simply flattening the wood slab at home It is really simple and cheap / 대형 우드슬램도 수평잡기에 편한 라우터 지그 만들기 You just need Linear Bush SBR 20UU, SC20UU Shaft Supporter SK20 Shaft 20mm and Bolts and Nuts Aluminum profiles(defend on)
Turn a pen, wooden fen & Pencil / 나무 볼펜, 샤프를 만들었어요
Просмотров 2602 года назад
DIY Wooden Pens and Pencils. / 여러가지 종류의 나무를 이용해 볼펜과 샤프팬을 만들었어요. #turn a pen #Lathe #pencil #woodworking #woodencraft #woodenlathe
Unique morden wall clock / 재미로 만들어 보는 벽시계
Просмотров 1062 года назад
It is just the beginning of the clocks. I'll make a more fun clock
DIY Camping Table / 캠핑 테이블 만들기
Просмотров 8 тыс.2 года назад
Making wooden portable camping table. It is rollable and retractable / 말고 접을 수 있는 휴대가 간편한 캠핑 테이블. #camping #캠핑 #캠핑테이블
Best woodworking impact & drill. Worx Combo Kit WU132, WU130 / 목공에 적합한 임팩, 드릴
Просмотров 9 тыс.2 года назад
Compact and Durable, Professional Worx Impact and Drill / 목공작업에 적합한 웍스 파워공구 입니다. #worx #전동공구
American Flag out of wood. Custom made (feat. Epoxy resin) / 미국 국기 만들기
Просмотров 1,6 тыс.3 года назад
American Flag out of wood. Custom made (feat. Epoxy resin) / 미국 국기 만들기
Chainsaw explained. the Chainsaw Chain / 엔진톱 체인에 대한 간단한 설명
Просмотров 3543 года назад
Chainsaw explained. the Chainsaw Chain / 엔진톱 체인에 대한 간단한 설명
Useful Jigs For The Table Saw/ 유용한 테이블쏘 지그 만들기
Просмотров 2,5 тыс.3 года назад
Useful Jigs For The Table Saw/ 유용한 테이블쏘 지그 만들기
Making a Miter Sled For The Table Saw / 테이블쏘 지그, 각도 절단기
Просмотров 6463 года назад
Making a Miter Sled For The Table Saw / 테이블쏘 지그, 각도 절단기
How to make Coffee table with epoxy resin. DIY / 에폭시 레진 리버 테이블
Просмотров 1,6 тыс.4 года назад
How to make Coffee table with epoxy resin. DIY / 에폭시 레진 리버 테이블
Quick Made Router Milling Jig / 초간단 라우터 밀링 지그
Просмотров 2,2 тыс.4 года назад
Quick Made Router Milling Jig / 초간단 라우터 밀링 지그
Building Honeycomb Shelves / 육각형 수납 선반 만들기
Просмотров 1,6 тыс.4 года назад
Building Honeycomb Shelves / 육각형 수납 선반 만들기
STIHL MS361 Turned to Hot saw, Custom Chainsaw exhaust pipe / 엔진톱 배기구 튜닝
Просмотров 188 тыс.4 года назад
STIHL MS361 Turned to Hot saw, Custom Chainsaw exhaust pipe / 엔진톱 배기구 튜닝
Building A Heavy Duty Saw Horse / 대형 통나무를 거치 할 수 있는 작업대
Просмотров 3034 года назад
Building A Heavy Duty Saw Horse / 대형 통나무를 거치 할 수 있는 작업대
Making A Table Saw Sled In One Hour / 가로절단 가능 테이블쏘 지그 만들기(썰매)
Просмотров 1,5 тыс.4 года назад
Making A Table Saw Sled In One Hour / 가로절단 가능 테이블쏘 지그 만들기(썰매)
Gas Powered belt Sander Working Good / 엔진으로 작동하는 목공용 밸트샌더
Просмотров 8904 года назад
Gas Powered belt Sander Working Good / 엔진으로 작동하는 목공용 밸트샌더
Unique woodworking Belt Sander / 아주 특별한 목공용 밸트샌더
Просмотров 6 тыс.4 года назад
Unique woodworking Belt Sander / 아주 특별한 목공용 밸트샌더
Building A Woodworking Table Saw Workbench / 목공용 테이블쏘 작업대 만들기
Просмотров 34 тыс.4 года назад
Building A Woodworking Table Saw Workbench / 목공용 테이블쏘 작업대 만들기
Korea International Furniture & Interior Fair / 일산 킨텍스 목공 전시회
Просмотров 9435 лет назад
Korea International Furniture & Interior Fair / 일산 킨텍스 목공 전시회
Bicycle Exhibition : Rarest Bicycles In One Place. 희귀한 자전거 전시회
Просмотров 2015 лет назад
Bicycle Exhibition : Rarest Bicycles In One Place. 희귀한 자전거 전시회
Logosol, Alaskan Milling a lumber / DIY 알라스칸, 로고솔 제재기로 통나무 켜기
Просмотров 7615 лет назад
Logosol, Alaskan Milling a lumber / DIY 알라스칸, 로고솔 제재기로 통나무 켜기
Mantap keren good suka suka suka
Men.. that was painful. When you get sawdust instead of chips it's wrong. Sharp chain 10° and use a skip chain. Overall nice made. 👍
That is absolutely gorgeous!
It is nice to see someone who breaks away from building the "standard Les Pauls, ES, Strat and Tele guitars." Nice work and nice design!
Loved the build and the result but didn't like the tone. Probably because he used cheap pickups.
@@Motocicleiros true, I would use better pickups next time. Thanks
Cosmeticly it looks great...functionality wise idk...the knows are in awkward places and the swit h to me would at least make more sense going left to right than front to back I think using an actual guitar next would have been a good call...don't get me wrong it looks great but the frets need shaved and the neck really needs to be able to be adjusted...also try some shims between the neck n body...just a piece of paper boutvthe size of a match width n put it on the pickup side of the body/ neck on the pickup side of the screws...kinda helps move the neck a Lil if the strings need lowered...other than that...taking it in to fine tune would be a great next step...they can dial it in...but it's freaking sharp man...great job it's beautiful
@@BIGGUN3460 thanks, It was my first time built guitar. I would be better next time I guess. Really thank you for your comment
@Cubemoon the craftsman ship is beautiful ...seriously...ik it seems like I was being kind of harsh...believe me...love the look of it...if those issues were worked out...I'd buy that guitar in a heartbeat...but those are things that people that really play would notice n I imagine your not just doing it for fun...my comment was truly to help you grow...fr...I'm a fan of your work for sure...
nice job --- great detail --- i think the center piece should be layered from the side as well
It looks interesting but it has no sustain at all.
Your’re right. No wonder why Gibson makes not likes this
@@Cubemoon Now that I think about it, Gibson does make banjos. This guitar is almost like a banjo.
How much would this cost?
ruined the length of the exhaust. that determine the rpm of the exhaust also the volume is ruined
Could you tell me what the dimensions are of the wooden laminate at 3:02? Are the wooden pieces quarter sawn?
there are 5 pieces of laminate, from left 35mm, 10mm, 20mm, 10mm, 35mm. and I sawn 35mm to 12mm approx.
@@Cubemoon Thanks for your answer, so that is the width of the different pieces, what is the height?
What is the wood you are sawing at 2:20?
that is mahogany.
Les Paul ? Is it for Les John Paul John from Les Zeppelin ?
⚘⚘⚘⚘⚘⚘ 💗💗💗💗💗💗💗
Out of aluminum ? 3D printing flying V ?
Please share the diagram of this
I just downloaded a Les Paul diagram from internet and added some imagination
Please share the diagram of this
I just used Les Paul Diagram and put some imagenation
LMAO! That's hilarious! Nice
With the BEAUTIFUL Multi-lam NECK, you might try a THRU-NECK next time, making it REALLY FUTURISTIC-looking! NICE TOOLS, SHOP, CNC, PLANER, etc. TOO! What was the final WEIGHT of this thing in the end? Nice craftsmanship....reminded me of the 80's YAMAHA SBG's and ARIA Neck-thrus of that era. But the way you did the CONTROLS was really INNOVATIVE!!! If the body and neck had a slightly different SHAPE (more like an SG say) this could be easily MADE into a LEFTY OR RIGHTY, depending on the player! Cool design trick, that.
Thank you. I would better next time
i always start with the 2 outer strings so its locked in place.
looking at this design i think we shouldn't be making them any different. the switch and knob placement can not be beat.
Bravo.
Отличный дизайн! Ещё бы гриф с эффектои расщепления пополам, когда 5 колков с одной стороны и один с другой. Было бы вообще произвидение искусства
genio
I love the woodwork and concept. The volume and tone controls need to be somewhere else, easier for the player to use, also the selector switch. Maybe an acrylic insert on the bottom to put all the v/t/selector switch onto? Route the edge on the top of the bottom part, cut the acrylic piece to fit on top, then put the v/t in the typical place, and the selector switch at the front near the hook. Just an idea. Really cool look and work, though!
Thanks for your comment. It would be helpful that next time I build more guitar. thanks
Отличная работа
great build, but please go countersink those holes on the knob cover lol
Thanks. This was first time I built guitar. Maybe I’ll be better next time
@@Cubemoon incredible work for your first time! It turned out beautifully!
Better choices, glued in neck, put wire routing holes in as you build the body up, put the four pots on the bottom and the selector switch in the gap on top where the les paul switch position is on nearly all their high end guitars. Ultimately though, I can just buy an RKS, oh hang on, I did.
красиво,необычно...но звук полный отстой!
I know it sounds s**t, but I fixed little bit, better than before. Thanks
Oooooh, is that what they mean by hollow body guitar?🤔
Nicely old boy 🎉
Oh! Thanks man
My sound vote 45/100. Guitars are sound making objects not a painting to be admired,, a bit tinny. lovely craftmanship
You gave me too much score, it was the first time I made guitar. I would do better next time
제가 정말 필요한 아이템입니다 유익한 영상감사합니다 ❤
It's a beautiful guitar, absolutely love the wood choices...was wondering if there was a reason you didn't use any shielding tape...it really is spectacular...
Thats great....a good plan would be to make the middle layer out of epoxy mixed with glow in the dark powder....so that guitars middle part ll glow in the absolute darkness like a led light...
basically a yamaha silent guitar ... cool ....
dude your guitar is totally sick ! one of the best ever ! i bet its not as half as heavy as a gibson les paul , super clean custom
Thanks, man. I really appreciate it.
Well made but I don’t trust that CA glue for the sides knowing that if it falls over that glue up might fail but non taken from ur guitar it’s perfectly made and that outer coat might even save my opinion on the glue up
Thank you. your right, I hope it does not fail
Great work. I love the design and I'm in love with that wood.
TRUE LES PAULS FIRST IDEA A LOG WITH SIDES GREAT
Ficou top top show the bool
Look at the flame on th.......oh.
I loot! I want one!
One of the most strange projects in engineering aspects, time to time unlogical, such as bolt-on joint already glued-in neck. Or tone-control and wiring, etc. But, at the same time its interesting project 🤝
Thanks, during the project I made a mistake so strange things happen
Very well done.
This is so beautiful!
como que sonaba un poco mal no?
the sound isn't perfect
@@Cubemoon, а звук не идеален из-за корпуса или электроники?
Gran trabajo; Hermosa guitarra, felicitaciones!!!
Absolutely perfect!!! Where can I order one
Beautiful work! How about a headless version?